TM 9-2330-334-13&P
MAIN ELECTRICAL HARNESS REPLACEMENT - Continued
0066 00
0066 00-5
Change 1
REMOVAL – Continued
NOTE
•
All main electrical harness clamps are removed the same way. One shown.
•
Remove plastic cable ties as required.
•
Remove convoluted tubing as required.
5.
Remove self-locking nut (9), bolt (10), and clamp (11) from rail assembly (12). Discard self-locking
nut.
6.
Remove main electrical harness (8) from clamp (11).
NOTE
The following two steps require the aid of an assistant.
7.
Perform the previous two steps on remaining clamps.
8.
Remove main electrical harness (8) from trailer.