TM-9-2330-334-13-P
FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1
TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
DECEMBER 2013
CHANGE 1
TM-9-2330-334-13-P - Page 498 of 1184
TM 9-2330-334-13&P
MAIN ELECTRICAL HARNESS REPLACEMENT - Continued
0066 00
Change 1
0066 00-6
INSTALLATION
NOTE
•
All main electrical harness clamps are installed the same way. One shown.
•
Install plastic cable ties as required.
•
Install convoluted tubing as required.
1.
Position main electrical harness (8) on trailer.
2.
Position main electrical harness (8) in clamp (11).
NOTE
Do not tighten clamps until harness is connected to junction box and there’s enough
slack to connect harness to converter box.
3.
Position clamp (11) on rail assembly (12) with self-locking nut (9) and bolt (10).
4.
Perform the previous two steps on remaining clamps.
Back to Top
