TM 9-2330-334-13&P
EMERGENCY/SERVICE GLADHAND HOSE REPLACEMENT - Continued 0079 00
0079 00-5
Change 1
INSTALLATION
WARNING
Adhesives and compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. Keep away from open fire and use in a well-
ventilated area. If adhesive or compound get on skin or clothing, wash
immediately with soap and water. Failure to comply may result in injury to
personnel.
NOTE
Perform the following eight steps on EMERGENCY/SERVICE gladhand hoses. Both
EMERGENCY and SERVICE gladhand hoses are installed the same way. SERVICE
gladhand hose is shown.
1.
Apply sealant to tubing connector (6).
2.
Install tubing connector (6) in hose (9).
3.
Install data plate (7) and tubing connector (6) on frame rail (8).
4.
Install coupling (5) in tubing connector (6).