TM 9-2330-334-13&P
SPLASHGUARD REPLACEMENT
0097 00
Change 1
0097 00-2
INSTALLATION
NOTE
All splash guards are installed the same way.
Front LH side is shown.
1.
Install splash guard (6), mounting plate (5) with two screws (2), one hook screw (3), six
washers, and four nuts (1) on bracket (7).
2.
Tighten nuts (1) to 40-46 lb-ft (54-62 N·m).
OPERATIONAL CHECKS
1.
Couple trailer (WP 0043 23, TM 2320-392-10-1, Coupling Trailer).
2.
Operate trailer and check for proper operation of splash guards.
3.
Uncouple trailer (WP 0043 24, TM 2320-392-10-1, Uncoupling Trailer).
END OF TASK
END OF WORK PACKAGE