TM 9-2330-334-13&P
FOUR PORT TASK VALVE REPLACEMENT - Continued
0109 00
Change 1
0109 00-8
INSTALLATION
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. Keep away from open
fire and use in well-ventilated area. If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately with soap and water. Failure to
comply may result in injury to personnel.
NOTE
Perform the following three steps on the rear four port task valve.
1.
Apply sealing compound to threads of plug (17).
2.
Install plug (17) on four port task valve (9).