TM 9-2330-335-14&P
0021-2
0021
REMOVAL
00021
1.
Chock tires on axle not being lifted.
2.
Position jack on ground board under axle closest to where tire(s) will be removed, as shown.
3.
Loosen, but do not remove, 10 nuts (Figure 1, Item 1) while tires are in contact with ground. If necessary, use a cheater
pipe for additional leverage.
4.
Jack up axle until tire and wheel assemblies (Figure 1, Items 2 and 3) clear the ground.
5.
Remove 10 nuts (Figure 1, Item 1) and 2 tire and wheel assemblies (Figure 1, Items 2 and 3).
6.
Check lugs and wheel studs for damage and replace as needed.
Figure 1.
Tire and Wheel Assembly.
021
END OF TASK
447-0045