TM 9-2330-335-14&P
ix/(x blank)
FEATURES OF THIS MANUAL
1.
WARNINGs, CAUTIONs, and NOTEs are as follows:
WARNING
A WARNING indicates a hazard which may result in injury or death to personnel.
CAUTION
A CAUTION is a reminder of safety practices or directs attention to usage practices that may result in damage to
equipment.
NOTE
A NOTE is a statement containing information that will make the procedures easier to perform.
2.
Statements and words of particular interest may be printed in underlined or CAPITAL letters to create emphasis.
3.
Within a procedural step, reference may be made to another work package in this manual or to another manual. These
references indicate where you should look for more complete information.
4.
Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art are text or
numbers.
5.
Numbers located at lower right corner of art (e.g., 447-0001; 447-0002) are art control numbers and are used for tracking
purposes only.
6.
Technical instructions include metric units as well as standard units. For your reference, a
Metric Conversion Chart
is
located on the inside back cover of this manual.