TM 9-2330-335-14&P
0001-1
0001
FIELD AND SUSTAINMENT MAINTENANCE
-
GENERAL INFORMATION
SCOPE
0001
1.
Type of Manual.
This manual is an: Operator’s, Organizational, Direct Support, and General Support
Maintenance Manual (including Repair Parts and Special Tools List).
2.
Equipment Name and Model Number.
a.
M871R, Semitrailer, Tactical, Breakbulk/Container Transporter, 22-1/2 Ton, Reset, NSN
2330-01-528-6690b.
M871A1R, Semitrailer, Tactical, Breakbulk/Container Transporter, 22-1/2 Ton, Reset, NSN
2330-01-528-6673c.
M871A2R, Semitrailer, Tactical, Breakbulk/Container Transporter, 22-1/2 Ton, Reset, NSN
2330-01-528-66983.
Purpose of Equipment.
The semitrailers are used to transport containerized American National Standard Institute/
International Organization for Standardization (ANSI/ISO), breakbulk cargo, or ammunition on highways or off-roads
.
MAINTENANCE FORMS, RECORDS, AND REPORTS
0001
Department of the Army forms and procedures used for the equipment maintenance will be those prescribed by DA PAM
750-8,
The Army Maintenance Management System (TAMMS) User Manual
.
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
0001
If your semitrailer needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you
do not like about your equipment. Let us know why you do not like the design or performance. If you have Internet access, the
choose the “Submit Quality Deficiency Report” bar). The Internet form lets you choose to submit an EIR, a Product Quality
Deficiency Report (PQDR), or a Warranty Claim Action (WCA). You may also submit your information using an SF Form
368 (
Product Quality Deficiency Report
). You can send your SF Form 368 via e-mail, regular mail, or facsimile using the
addresses/facsimile numbers specified in DA PAM 750-8,
TAMMS User Manual
. We will send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
0001
1.
CPC of Army materiel is a continuing concern. It is important that any corrosion problems with this item be
reported so that the problem can be corrected and improvements can be made to prevent the problem in future
items.
2.
Corrosion specifically occurs with metals. It is an electrochemical process that causes the degradation of metals. It is
commonly caused by exposure to moisture, acids, bases, or salts. An example is the rusting of iron. Corrosion damage in
metals can be seen, depending on the metal, as tarnishing, pitting, fogging, surface residue, and/or cracking.
3.
Plastics, composites, and rubbers can also degrade. Degradation is caused by thermal (heat), oxidation (oxygen),
solvation (solvents), or photolytic (light, typically UV) processes. The most common exposures are excessive heat or
light. Damage from these processes will appear as cracking, softening, swelling, and/or breaking.
4.
SF Form 368
, Product Quality Deficiency Report
should be submitted to the address specified in DA PAM 750-8,
TAMMS User Manual
.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
0001
For destruction of Army materiel to prevent enemy use, refer to TM 750-244-3.
PREPARATION FOR STORAGE OR SHIPMENT
0001
Refer to WP 0066 for storage and shipment information.
4