0004-1
TM 9-2330-335-14&P
0004
OPERATOR MAINTENANCE
-
DESCRIPTION AND USE OF OPERATOR’S CONTROLS AND INDICATORS
CAUTION
•
Fording:
Antilock braking system ECU must not be submerged in water. Rain, sleet, or snow will
not affect operation of ECU. Failure to comply may result in damage to equipment.
•
Fording:
Immediately after fording, apply service brakes to expel water from air brake chamber. If
fording in salt water, flush chambers with fresh low-pressure water when mission allows. Failure to
comply may result in damage to equipment.
•
Fording:
Do not exceed fording depth of 30 in. (76.2 cm) or damage to equipment may result.
NOTE
Light Discipline:
For light discipline mission requirements, DO NOT change, remove, or disable
the electrical system wiring, lighting, or reflectors. Use duct tape to cover the lens on the ABS
warning light and reflectors as needed to meet mission requirements.
6