TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 589 of 640
0104-1
TM 9-2330-335-14&P
0104
FIELD AND SUSTAINMENT MAINTENANCE
-
BEARING REMOVAL AND INSTALLATION
Removal, Inspection, Installation
REMOVAL
000104
1.
Remove hub/wheel assembly from vehicle in accordance with recommended practices.
2.
Remove inboard and outboard bearing cones and set aside for inspection.
3.
Using a mild steel drift or cup driver, carefully drive out bearing cups.
CAUTION
•
Caution should be used when driving bearing cups, as drifts and other tools can damage bearings.
•
Drifts can damage hub bearing bores. Be careful not to score bores while removing cups, especially
when using aluminum hubs.
Figure 1.
Removal.
0104
END OF TASK
447-0255
4
Back to Top
