TM 9-2330-335-14&P
0104-2
0104
INSPECTION (REF. TM 9-214)
000104
1.
Inspect the hub bearing bores and shoulders for damage. The bores should be smooth and free from scoring,
burrs, indications of cup spinning, or other forms of damage. Remove any burrs or raised areas using emery
cloth, a file, or other appropriate tool.
2.
Measure the bearing cup bore and compare to manufacturer specifications.
Figure 2.
Inspection.
0104
3.
Inspect bearing cups and cones for damage. Bearings should be free from chips, contamination, and signs of excessive
wear or excessive heat. Refer to bearing damage analysis literature for identifying possible bearing issues.
4.
Inspect axle spindle bearing journals for any signs of damage or excessive wear. Remove any raised areas or burrs using
emery cloth, file, or other appropriate tool.
5.
Journals should be measured and compared with manufacturer specifications.
Figure 3.
Inspection.
0104
END OF TASK
447-0256
447-0257