TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 174 of 500

FLATRACK MODE TO CONTAINER MODE - Continued

43.

Install lynch pin (Figure 14, Item 7) on hitch pin (Figure 14, Item 6).

44.

Repeat Steps (40) through (43) for right side cart pivot bracket.

END OF TASK

CONTAINER MODE TO BUMPER

1.

Start engine. Refer to vehicle Operator's manual (WP

0057).

2.

Turn hydraulic selector switch to AUTO position. Refer to vehicle Operator's manual

(WP

0057).

WARNING

•

Check for overhead power lines or other obstructions before

attempting LHS operation. Failure to comply may result in injury

or death to personnel.

•

Ensure all personnel are clear of the vehicle, trailer, and cart

during LHS operations. Failure to comply may result in injury or

death to personnel.

3.

Move joystick to UNLOAD position. Refer to vehicle Operator's manual (WP

0057).

4.

With the aid of an assistant, release joystick when lift hook (Figure 15, Item 2) is

approximately 12 in. (305 mm) above cart (Figure 15, Item 1). Refer to vehicle

Operator's manual (WP

0057).

TM 9-2330-342-10

0025

0025-16