TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 179 of 500

CONTAINER MODE TO BUMPER - Continued

19.

Remove hitch pin (Figure 18, Item 6) from cart pivot bracket (Figure 18, Item 4) and

trailer bracket (Figure 18, Item 5) and rotate cart pivot bracket (Figure 18, Item 4)

down.

CAUTION

After lynch pins and hitch pins are removed, set lynch pins and hitch pins

on top of trailer so they are not hanging down. Failure to comply may

result in damage to equipment.

20.

Repeat Steps (16) through (19) for right side cart pivot bracket.

WARNING

Ensure all personnel are clear of the vehicle, trailer, and cart during LHS

operations. Failure to comply may result in serious injury or death to

personnel.

21.

Move joystick to LOAD position. Refer to vehicle Operator's manual (WP

0057).

CAUTION

Ensure hitch pins and lynch pins do not get hooked on trailer while lifting

cart from trailer. Failure to comply may result in damage to equipment.

22.

With the aid of an assistant, raise cart (Figure 19, Item 1) until cart (Figure 19, Item

1) is clear of trailer (Figure 19, Item 2).

TM 9-2330-342-10

0025

0025-21