TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 203 of 500
BUMPER TO CONTAINER MODE - Continued
2
3
6
1
1
2
4
5
Figure 40.
Bumper to Container Mode.
53.
Drive vehicle forward and stow LHS. Refer to vehicle Operator's manual (WP
0057).
54.
Remove cart loading sling (Figure 40, Item 5) from two cart brackets (Figure 40, Item
3).
NOTE
Left side and right side hitch pins and lynch pins are installed the same
way. Left side shown.
55.
Align two bottom holes in cart bracket (Figure 40, Item 3) with holes in cart pivot
bracket (Figure 40, Item 6) and install two hitch pins (Figure 40, Item 1) in cart pivot
bracket (Figure 40, Item 6) and cart bracket (Figure 40, Item 3).
56.
Install two lynch pins (Figure 40, Item 2) in hitch pins (Figure 40, Item 1).
57.
Repeat Steps (55) and (56) for right side cart pivot bracket.
NOTE
Left side and right side container locks are locked the same way. Left side
shown.
58.
Remove lynch pin (Figure 41, Item 2) from hitch pin (Figure 41, Item 1).
TM 9-2330-342-10
0025
0025-45
Back to Top
