FLATRACK MODE TO BUMPER - Continued
3
4
1
2
Figure 46.
Flatrack Mode to Bumper.
18.
Remove two hitch pins (Figure 46, Item 4) from cart pivot bracket (Figure 46, Item 2)
and cart bracket (Figure 46, Item 1).
CAUTION
After lynch pins and hitch pins are removed, set lynch pins and hitch pins
on top of trailer so they are not hanging down. Failure to comply may
result in damage to equipment.
19.
Repeat Steps (17) and (18) for right side cart pivot bracket.
20.
Start engine. Refer to vehicle Operator's manual (WP
0057).
TM 9-2330-342-10
0025
0025-51