TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 214 of 500
FLATRACK MODE TO BUMPER - Continued
NOTE
Left side and right side container locks are unlocked the same way. Left
side shown.
42.
Remove lynch pin (Figure 52, Item 2) from hitch pin (Figure 52, Item 1).
1
1
3
3
4
2
2
Figure 52.
Flatrack Mode to Bumper.
43.
Remove hitch pin (Figure 52, Item 1) from container lock bracket (Figure 52, Item 4)
and container lock (Figure 52, Item 3).
44.
Rotate container lock (Figure 52, Item 3) to unlocked position.
45.
Install hitch pin (Figure 52, Item 1) in container lock (Figure 52, Item 3).
46.
Install lynch pin (Figure 52, Item 2) in hitch pin (Figure 52, Item 1).
47.
Repeat Steps (42) through (46) for right side container lock.
WARNING
Do not stand between trailer and vehicle during backing procedures.
Failure to comply may result in injury or death to personnel.
TM 9-2330-342-10
0025
0025-56
Back to Top
