TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 222 of 500

FLATRACK MODE TO BUMPER - Continued

4

5

3

2

6

1

1

4

3

2

Figure 59.

Flatrack Mode to Bumper.

80.

Remove hitch pin (Figure 59, Item 4) from cart pivot bracket (Figure 59, Item 6).

81.

Position cart pivot bracket (Figure 59, Item 6) in the up position and install hitch pin

(Figure 59, Item 4) in cart pivot bracket (Figure 59, Item 6) and trailer bracket (Figure

59, Item 5).

82.

Install lynch pin (Figure 59, Item 3) in hitch pin (Figure 59, Item 4).

83.

Install two hitch pins (Figure 59, Item 1) in cart pivot bracket (Figure 59, Item 6).

84.

Install two lynch pins (Figure 59, Item 2) in hitch pins (Figure 59, Item 1).

85.

Repeat Steps (79) through (84) for right side pivot bracket.

86.

Notify field maintenance at earliest opportunity to replace lockwashers and tighten

nuts securing cart to bumper.

END OF TASK

TM 9-2330-342-10

0025

0025-64