TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 219 of 500

FLATRACK MODE TO BUMPER - Continued

1, 2

4

3

1

3

2

Figure 56.

Flatrack Mode to Bumper.

70.

Remove hitch pin (Figure 56, Item 1) from container lock (Figure 56, Item 3).

NOTE

Cart may need to be adjusted by hand to allow container lock to be rotated

to locked position.

71.

Rotate container lock (Figure 56, Item 3) to locked position.

72.

Install hitch pin (Figure 56, Item 1) in container lock bracket (Figure 56, Item 4) and

container lock (Figure 56, Item 3).

73.

Install lynch pin (Figure 56, Item 2) in hitch pin (Figure 56, Item 1).

74.

Repeat Steps (69) through (73) for right side container lock.

WARNING

Do not stand between trailer and vehicle when removing cart loading

sling. Stand on trailer when removing cart loading sling. Failure to comply

may result in injury or death to personnel.

75.

With the aid of an assistant, lower lift hook (Figure 57, Item 2) and remove cart loading

sling (Figure 57, Item 1) from lift hook (Figure 57, Item 2).

TM 9-2330-342-10

0025

0025-61