TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 229 of 500

BUMPER TO FLATRACK MODE - Continued

24.

Attach cart loading sling (Figure 64, Item 1) to lift hook (Figure 64, Item 2).

25.

Move joystick to LOAD position until all slack is out of cart loading sling (Figure 64,

Item 1). Refer to vehicle Operator's manual (WP

0057).

NOTE

Left side and right side container locks are unlocked the same way. Left

side shown.

26.

Remove lynch pin (Figure 65, Item 2) from hitch pin (Figure 65, Item 1).

1, 2

3

4

1

4

2

Figure 65.

Bumper to Flatrack Mode.

27.

Remove hitch pin (Figure 65, Item 1) from container bracket (Figure 65, Item 3) and

container lock (Figure 65, Item 4).

28.

Rotate container lock (Figure 65, Item 4) to unlocked position.

29.

Install hitch pin (Figure 65, Item 1) in container lock (Figure 65, Item 4).

30.

Install lynch pin (Figure 65, Item 2) in hitch pin (Figure 65, Item 1).

31.

Repeat Steps (26) through (30) for right side container lock.

TM 9-2330-342-10

0025

0025-71