TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 542 of 1348
REAR/SIDE LED MARKER LIGHT HARNESS (RIGHT SIDE) REPLACEMENT - Continued
1
2
3
4
5
5
6
7
8
8
9
10
4
3
2
1
7
6
Figure 33.
Rear/Side LED Marker Light Harness (Right Side) Installation.
3.
Connect two 1012B connectors (Figure 33, Item 4) on two 489 connectors (Figure 33, Item 5).
4.
Install two wires 1435 (Figure 33, Item 7) on screws (Figure 33, Item 8) with locknuts (Figure 33, Item 6).
5.
Install two outer brackets (Figure 33, Item 2) on rear/side marker LED marker lights (Figure 33, Item 1) with
four screws (Figure 33, Item 3).
6.
Install cushion clip (Figure 34, Item 2) on right side LED marker light harness (Figure 34, Item 4) and trailer
frame (Figure 34, Item 3) with screw (Figure 34, Item 5) and locknut (Figure 34, Item 1).
4
5
2
1
3
Figure 34.
Rear/Side LED Marker Light Harness (Right Side) Installation.
7.
Install cable nut (Figure 35, Item 6) on right side LED marker light harness (Figure 35, Item 5).
TM 9-2330-342-23&P
0059
0059-24
Back to Top
