TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 536 of 1348
REAR/SIDE LED MARKER LIGHT HARNESS (LEFT SIDE) REPLACEMENT - Continued
1
2
3
4
5
6
7
8
8
9
10
5
4
3
2
1
7
6
Figure 23.
Rear/Side LED Marker Light Harness (Left Side) Installation.
3.
Connect two 1012B connectors (Figure 23, Item 5) on two 489 connectors (Figure 23, Item 4).
4.
Install two wires 1435 (Figure 23, Item 2) on screws (Figure 23, Item 1) with locknuts (Figure 23, Item 3).
5.
Install two outer brackets (Figure 23, Item 7) on rear/side marker LED marker lights (Figure 23, Item 8) with
four screws (Figure 23, Item 6).
6.
Install cushion clip (Figure 24, Item 3) on left side LED marker light harness (Figure 24, Item 1) and trailer
frame (Figure 24, Item 2) with screw (Figure 24, Item 5) and locknut (Figure 24, Item 4).
4
5
2
1
3
Figure 24.
Rear/Side LED Marker Light Harness (Left Side) Installation.
7.
Install cable nut (Figure 25, Item 7) on left side LED marker light harness (Figure 25, Item 8).
TM 9-2330-342-23&P
0059
0059-18
Back to Top
