TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 528 of 1348
MAIN HARNESS REPLACEMENT - Continued
NOTE
•
Main harness is installed on front/side marker lights the same way. Left side shown.
•
Perform Step (15) if grommet needs to be installed.
15.
Install grommet (Figure 13, Item 5) on trailer (Figure 13, Item 3).
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
12
Figure 13.
Main Harness Installation.
16.
Pull wire harness (Figure 13, Item 6) through grommet (Figure 13, Item 5).
17.
Install cushion clip (Figure 13, Item 7) on wire harness (Figure 13, Item 6) and trailer (Figure 13, Item 3) with
screw (Figure 13, Item 4), washer (Figure 13, Item 8), lockwasher (Figure 13, Item 9), and nut (Figure 13, Item
10).
18.
Install cushion clip (Figure 13, Item 12) on wire harness (Figure 13, Item 6) and trailer (Figure 13, Item 3) with
screw (Figure 13, Item 11) and locknut (Figure 13, Item 2).
19.
Install cushion clip (Figure 13, Item 16) on wire harness (Figure 13, Item 6), bracket (Figure 13, Item 17), and
ISO lock mount (Figure 13, Item 1) with washer (Figure 13, Item 15), lockwasher (Figure 13, Item 14), and
screw (Figure 13, Item 13).
20.
Install wire 1435 (Figure 14, Item 1) and wire 1435 (Figure 14, Item 4) on bracket (Figure 14, Item 2) with screw
(Figure 14, Item 3) and locknut (Figure 14, Item 5).
TM 9-2330-342-23&P
0059
0059-10
Back to Top
