TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 519 of 1348
FIELD MAINTENANCE
WIRE HARNESS REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP
0194, Table 1, Item 47)
Materials/Parts
Petrolatum, Technical (WP
0193, Table 1, Item 47,
48, 49)
Cable Ties (WP
0193, Table 1, Item 11)
Sealant, RTV (WP
0193, Table 1, Item 51)
Tags, Identification (WP
0193, Table 1, Item 59)
Locknut Qty:
1 (WP
0195, Table 1, Item 18)
Locknut Qty:
8 (WP
0195, Table 1, Item 51)
Locknut Qty:
5 (WP
0195, Table 1, Item 3)
Lockwasher Qty:
6 (WP
0195, Table 1, Item 78)
Locknut Qty:
21 (WP
0195, Table 1, Item 66)
Materials/Parts (cont.)
Locknut Qty:
1 (WP
0195, Table 1, Item 71)
Packing, Preformed Qty:
1 (WP
0195, Table 1,
Item 64)
References
Fig. 2 (WP
0137)
Fig. 3 (WP
0138)
Fig. 4 (WP
0139)
Fig. 5 (WP
0140)
Fig. 10 (WP
0145)
Fig. 11 (WP
0146)
Fig. 12 (WP
0147)
Equipment Condition
Wheels chocked (TM 9-2330-342-10). (WP
0190)
Intervehicular cables disconnected (TM
9-2330-342-10). (WP
0190)
MAIN HARNESS REPLACEMENT
REMOVAL
NOTE
•
Tag and mark all wires before removing.
•
Remove cable ties as required.
•
Perform Steps (1) and (2) only if replacing diode assembly (Figure 1, Item 3).
1.
Remove cable ties (Figure 1, Item 1) and separate diode assembly (Figure 1, Item 3) from parking brake line
(Figure 1, Item 2).
TM 9-2330-342-23&P
0059
0059-1
Back to Top
