TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 522 of 1348
MAIN HARNESS REPLACEMENT - Continued
9.
Remove screw (Figure 4, Item 13), lockwasher (Figure 4, Item 14), washer (Figure 4, Item 15), and cushion
clip (Figure 4, Item 16) from bracket (Figure 4, Item 17), ISO lock mount (Figure 4, Item 1), and wire harness
(Figure 4, Item 6). Discard lockwasher.
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
12
Figure 4.
Main Harness Removal.
10.
Remove locknut (Figure 4, Item 2), screw (Figure 4, Item 11), and cushion clip (Figure 4, Item 12) from trailer
(Figure 4, Item 3) and wire harness (Figure 4, Item 6). Discard locknut.
11.
Remove nut (Figure 4, Item 10), lockwasher (Figure 4, Item 9), washer (Figure 4, Item 8), screw (Figure 4,
Item 4), and cushion clip (Figure 4, Item 7) from trailer (Figure 4, Item 3) and wire harness (Figure 4, Item 6).
Discard lockwasher.
12.
Pull wire harness (Figure 4, Item 6) through grommet (Figure 4, Item 5).
NOTE
Perform Step (13) if grommet needs to be removed.
13.
Remove grommet (Figure 4, Item 5) from trailer (Figure 4, Item 3).
14.
Repeat Steps (5) through (13) for front/right side marker lights and main harness removal.
15.
Remove nine locknuts (Figure 5, Item 4), screws (Figure 5, Item 2), and cushion clips (Figure 5, Item 5) from
main harness (Figure 5, Item 1) and trailer frame (Figure 5, Item 3). Discard locknuts.
TM 9-2330-342-23&P
0059
0059-4
Back to Top
