TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 512 of 1348
INSTALLATION - Continued
3
2
1
4
5
6
7
8
9
10
11
Figure 5.
Rear Center LED Marker Lights/Bracket Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
NOTE
Prepare mounting surfaces to ensure bare metal contact for grounds.
5.
Apply RTV sealant to all outside grounding connections.
6.
Install pigtail ground (Figure 5, Item 7) and wire 1435 (Figure 5, Item 4) on mounting base (Figure 5, Item 10)
and bracket (Figure 5, Item 5) with screw (Figure 5, Item 8) and locknut (Figure 5, Item 3).
7.
Connect 1012B connector (Figure 5, Item 2) to 489 connector (Figure 5, Item 11).
8.
Connect pigtail (Figure 6, Item 1) to LED (Figure 6, Item 2).
TM 9-2330-342-23&P
0057
0057-4
Back to Top
