TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1053 of 1364

TM 9-2350-238-20-1

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

1

Inspect for broken, damaged, or missing

4

parts.

2

For repair of cable terminals and shell con-

5

nectors, refer to general maintenance,

page 2-371.

6

3

Lacing cord is a manufactured item, refer

to appendix D.

Electrical wires are manufactured items,

refer to appendix D.

Blower assembly is a repairable assembly.

Notify direct support maintenance.

Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1).

For reassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

1

Position blower assembly (1) in hull, and

2

If removed, install new lacing cord (5) in

secure with six new Iockwashers (2), six

fuel filter heater (6). Install fuel filter

screws (3), and new lockwire (4).

heater (6) on fuel filter (7).

NOTE

3

Install screw (8) to connect ground lead (9)

Steps 2 and 3 are written for one fuel

of fuel filter heater (6).

filter heater, but apply to both fuel fil-

ter heaters.

2-1027