TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 226 of 1364

TM 9-2350-238-20-1

2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).

Step 2.

To access transmission oil thermostatic switch, remove transmission deck

lid assembly. Refer to page 2-938. Disconnect lead 509 from transmission

oil thermostatic switch. Start engine and run at 800 rpm. If warning horn

and ENGINE-XMSN TEMP-PRESS warning light stop operating, stop

engine and replace transmission oil thermostatic switch. Refer to page 2-

626. If warning horn and ENGINE-XMSN TEMP-PRESS warning light do

not stop operating, go to step 3. Connect lead 509 to transmission oil

thermostatic switch.

Step 3.

Disconnect lead 509 from engine coolant high-temperature warning switch.

Start engine and run at 800 rpm. If warning horn and ENGINE-XMSN

TEMP-PRESS warning light stop operating, stop engine and replace engine

coolant high-temperature warning switch. Refer to page 2-626. If warning

horn and ENGINE-XMSN TEMP-PRESS warning light do not stop

operating, repair lead 509. Refer to page 2-371. Connect lead 509 to

engine coolant high-temperature warning switch.

2-200