TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 369 of 1364
TM 9-2350-238-20-1
Step
6.
Disconnect wiring harness from driver's heater. Check continuity on each
lead in wiring harness. If multimeter indicates 0 ohms at each lead in wiring
harness, replace driver’s heater. Refer to page 2-1068. If multimeter
indicates infinity at any lead in wiring harness, repair wiring harness. Refer
to page 2-371. Connect wiring harness.
BJ. PYROMETER CIRCUIT.
2-343
Back to Top
