TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 444 of 1364

TM 9-2350-238-20-1
2-37. MAINTENANCE OF EXTERNAL OIL LINES AND FITTINGS (UPPER ENGINE).
This task covers:
a.
Removal
b.
Inspection/Repair
c.
Installation
INITIAL SETUP
Materials/Parts
Equipment Conditions
Filter element (2)
2-384 Powerplant removed
Lockwasher (4)
2-938 Hull transmission compartment
Lockwasher (3)
deck assembly removed
Lockwasher (8)
2-935 Hull engine compartment deck
Lockwasher (4)
assembly lid removed
Preformed packing (2)
Preformed packing (3)
Self-locking nut (4)
References
TM 9-2350-238-10
TM 9-2350-238-24P-1
TM 9-2815-202-24P
1
2
3
4
5
6
Place suitable container under fluid filter
(1).
Remove two drain plugs (2) and drain oil
into container.
Remove capscrew (3) from loop clamp (4),
and remove loop clamp from nonmetallic
hose assembly (5).
Disconnect nonmetallic hose assembly (5)
from pipe to tube elbow (6).
Remove pipe to tube elbow (6) from drain
cock (7).
Loosen nut (8) on drain cock (7), and
remove drain cock from angle bracket (9).
2-418


Back to Top