TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 449 of 1364

TM 9-2350-238-20-1

4

5

6

7

8

9

10

NOTE

There are two filter elements housed

in the fluid filter. The following

procedure is written for the

installation of one, but applies to

both.

Install washer (9) in oil filter adapter (6).

Install new filter element (10) in shell (11).

Install shell (11 ) on oil filter adapter (6)

with drain plug hole (12) at lowest point,

and tighten shoulder bolt (13).

Install pipe bushing (14) on fluid filter (15).

Install oil filter cooler hose pipe to tube

elbow (16) on pipe bushing (14).

Install oil filter cooler nonmetallic hose

assembly (17) on oil filter cooler hose pipe

to tube elbow (16).

Install new preformed packing (18) and oil

filter cooler nonmetallic hose assembly

(17) on engine, and secure with four new

Iockwashers (19)

capscrews (20).

and four hexagon head

2-423