TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 459 of 1364
TM 9-2350-238-20-1
14 Install new preformed packing (15) on tube nipple (16).
15 Install tube nipple (16) with new preformed packing (15) on engine oil reservoir (17).
16 Install fuel pump to reservoir drain hose assembly (18) on tube nipple (16).
17 Install new tube fitting locknut (19) and new preformed packing (20) on tube elbow (21).
18 Install tube elbow (21) with new tube fitting locknut (19) and new preformed packing (20) on
engine oil reservoir (17).
19 Tighten new tube fitting locknut (19) on tube elbow (21).
20 Install reservoir drain hose assembly (22) on tube elbow (21).
21 Install new tube fitting locknut (23) and new preformed packing (24) on tube elbow (25).
22 Install tube elbow (25) with new tube fitting locknut (23) and new preformed packing (24) on
engine oil reservoir (17).
23 Tighten new tube fitting locknut (23) on tube elbow (25).
24 Install engine block drain hose assembly (26) on tube elbow (25).
25 install new preformed packing (27) on tube nipple (28).
26 Install tube nipple (28) with new preformed packing (27) on engine oil reservoir (17).
27 Install transmission drain hose assembly (29) on tube nipple (28).
28 Install new tube fitting locknut (30) and new preformed packing (31) on tube elbow (32).
29 Install tube elbow (32) with new tube fitting locknut (30) and new preformed packing (31) on
engine oil reservoir (17).
30 Tighten new tube fitting locknut (30) on tube elbow (32).
31 Install engine condensation hose assembly (33) on tube elbow (32).
32 Install powerplant reservoir breather (34) on engine oil reservoir (17).
33 Install engine oil reservoir (17) and attached drain lines on engine.
34 Install four new Iockwashers (35) and four capscrews (36) on engine oil reservoir (17).
2-433
Back to Top
