TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 485 of 1364

TM 9-2350-238-20-1

2-46.

MAINTENANCE OF TURBOCHARGER

ITEMS (ENGINE MODEL 7083-7398).

AIR

INTAKE FILTER AND RELATED

This task covers:

a.

Removal

b.

Inspection/Repair

c. Installation

INITIAL SETUP

Tools and Special Tools

References

Plier wire twister (item 30, appx G)

TM 9-2350-238-24P-1

Materials/Parts

Equipment Conditions

Air inlet adapter gasket

2-935 Hull engine compartment deck

Lockwire (item 27, appx C)

assembly lid removed

1 Loosen two hose clamps (1) on air duct

hose (2). Remove air duct hose and two

hose clamps from intake filter element (3).

2 Remove Iockwire (4) and four hexagon

head capscrews (5).

3 Remove intake filter element (3) and air

inlet adapter gasket (6).

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing

parts.

2 Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1).

1

2

3

Install new air inlet adapter gasket (6) and

intake filter element (3).

Install four hexagon head capscrews (5)

and new Iockwire (4).

Install two hose clamps (1) and air duct

hose (2) on intake filter element (3).

Tighten hose clamps (1) on air duct hose

(2).

2-459