TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 931 of 1364

TM 9-2350-238-20-1

2-158. MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS

(LEFT SIDE) AND ATTACHING HARDWARE.

This task covers:

a.

Removal/Disassembly

C

.

Reassembly/lnstallation

b.

Inspection/Repair

INITIAL SETUP

Materials/Parts

Lockwasher (12)

Preformed packing

Preformed packing (5)

Tube fitting locknut (10)

References

TM 9-2350-238-20-2

TM 9-2350-238-24P-1

Equipment Conditions

2-640

Batteries and battery tray removed

2-952

Drivets seat removed

2-928

Driver’s compartment forward and aft cowls removed

Equipment stowage box removed (TM 9-2350-238-20-2)

General Safety Instructions

●

To avoid injury to personnel, do not tighten or loosen hydraulic fittings when system

is pressurized.

●

Lower the boom to stowed position before doing any maintenance on hydraulic

system.

●

Wipe up any spilled hydraulic fluid to prevent injury to personnel.

2-905