TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 941 of 1364

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

TM 9-2350-238-20-1

Install new tube fitting locknut (28), flat washer (29), and new preformed packing (30) on tube

elbow (31).

Install tube elbow (31) with attached parts on manifold (32).

Tighten tube fitting locknut (28) on tube elbow (31).

Connect hose assembly (27) to tube elbow (31).

Install tube assembly (33) on pressure switch (34).

If removed, install two new spacers (35) on two retaining straps (36).

Install two retaining straps (36), four new Iockwashers (37), and four screws (38) on tube

assemblies.

Install new tube fitting locknut (39) on lockout switch tee (40).

Install lockout switch tee (40) with tube fitting locknut (39) on bulkhead.

Connect tube assembly (33) to lockout switch tee (40).

Install new tube fitting locknut (41), flat washer (42), and new preformed packing (43) on tube

elbow (44).

Install tube elbow (44) with attached parts on lockout cylinder (45).

Tighten tube fitting locknut (41 ) on tube elbow (44).

Install hose assembly (46) on tube elbow (44).

Connect hose assembly (46) to lockout switch tee (40).

Tighten tube fitting locknut (39) on lockout switch tee (40).

Install tube assembly (47) on lockout switch tee (40).

Install new tube fitting locknut (48) on lockout switch tee (49).

Install lockout switch tee (49) with tube fitting locknut (48) on bulkhead.

Install tube cap (50) on lockout switch tee (49).

Tighten tube fitting locknut (48) on lockout switch tee (49).

Connect tube assembly (47) to lockout switch tee (49).

2-915