TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 963 of 1364

TM 9-2350-238-20-1

REASSEMBLY

1

2

3

4

5

6

If removed, install new rubber strip (1) on

engine compartment deck (2) using

adhesive.

If removed, install new rubber strip (3) on

access door (4) using adhesive.

Install hand hold (5), new Iockwasher (6),

and hexagon head capscrew (7) on

access door (4).

NOTE

Steps 4 thru 6 are written for one butt

hinge but apply to both butt hinges.

Install two spring retainers (8), butt hinge

(9), four machine screws (10), and four

new self-locking nuts (11) on engine

compartment deck (2).

Install access door (4), two spring

retainers (12), four machine screws (13),

and four new self-locking nuts (14) on butt

hinge (9).

NOTE

Bend tabs on new spring retainers to

hold torsion helical springs.

Install two torsion helical springs (15).

Secure each spring between two spring

retainers (8 and 12).

1

Install hull engine compartment deck

assembly lid (1) on hull.

2

Install ten rim clenching clamps (2), ten

flat washers (3), ten new Iockwashers (4),

and ten hexagon head capscrews (5) on

hull.

2-937