TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 972 of 1364

TM 9-2350-238-20-1

2-165. MAINTENANCE OF DRIVER’S HATCH COVER (CONT).

REASSEMBLY/INSTALLATION

1

2

3

4

5

6

7

8

9

NOTE

Perform steps 1 and 2 only if

cushioning pads have been removed.

Coat mating surfaces of new cushioning

pads (1 and 2) and hatch door (3) with

rubber adhesive, if removed.

Install new cushioning pads (1 and 2) on

hatch door (3). Bend back tabs on

cushioning pad (1). Allow to air dry for 1

hour.

Install new spring tension clip (4),

Install two new Iockwashers (5) and two

machine screws (6).

Install woodruff key (7), cupola cover

handle sleeve bearing (8), and outer cover

door handle (9).

Apply sealing compound to threads on

cupola cover inner door handle (10).

Install cupola cover inner handle knob (11)

on cupola cover inner door handle (10).

Install flat washer (12), cupola cover

handle sleeve bearing (13), and cupola

cover inner door handle (10).

Install flat washer (14) and new self-

Iocking nut (15).

2-946