TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 995 of 1364

TM 9-2350-238-20-1

8

9

10

11

12

13

14

15

NOTE

Steps 8 thru 14 are written for one

hydraulic cylinder assembly but apply

to both.

Place suitable container under hydraulic

cylinder assembly (7) to catch oil from

disconnected hoses.

Disconnect hydraulic hoses (8 and 9) from

hydraulic cylinder assembly (7).

Cover ends of hydraulic hoses (8 and 9)

to keep dirt out.

Remove two retaining rings (10) and

headless grooved pin (11 ).

Remove cotter pin (12).

Support hydraulic cylinder assembly (7)

and remove headless straight pin (13).

Remove hydraulic cylinder assembly (7).

NOTE

Steps 15 thru 22 are written for one

side of the vehicle but apply to both.

Remove ten hexagon head capscrews

(14), ten Iockwashers (15), access cover

(16), and gasket (17).

2-969