TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 138 of 327

11

12

13

14

Working from winch control end of

planetary winch drum (5), install new

cylinder mounting plate gasket (15) and

cylinder mounting adapter plate (16) on

shaft of stage four carrier assembly (13).

Ensure cylinder mounting adapter plate

(16) is installed in same position to

mounting lugs of reaction end winch

support (10).

Install six machine screws (17) and tor-

que to 5.0 ft-lb (6.8 N-m).

MOUNTING LUGS

Install new control cylinder gasket (18)

and winch control cylinder (19) on

cylinder mounting adapter plate (16) at

winch control end of planetary winch

drum (5). Ensure inlet port of winch con-

trol cylinder (19) is positioned opposite

mounting lugs.

TM 9-2350-238-34-2

Install four new Iockwashers (20) and

four hexagon capscrews (21) securing

winch control cylinder (19) to winch con-

trol end of planetary winch drum (5).

Torque four hexagon capscrews to 18 ft-

Ib (24 N-m).

2-125