TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 206 of 327

1

2

3

4

5

6

7

Do not disconnect fittings or remove

retainer caps until hydraulic pumps

are shut off and system pressure is

relieved. Failure to follow instruc-

tions may result in injury to person-

nel or damage to equipment.

Disassembly and reassembly of

valves should be performed in a

clean, dry, dust-free area to prevent

entry of foreign matter. Cover valve

ports to keep out dirt.

Remove two hexagon head capscrews (1),

two Iockwashers (2), and flow divider

manifold (3).

Remove mini check valve (4) and pre-

formed packing (5) from multiple connect-

or (6). Remove preformed packing from

mini check valve.

Remove retaining ring (7) from manifold

pipe plug (8).

Remove manifold pipe plug (8) and pre-

formed packing (9) from multiple connect-

or (6). Remove preformed packing from

manifold pipe plug.

Remove machine thread plug (10) and pre-

formed packing (11) from multiple con-

nector (6).

Remove preformed packing

from machine thread plug.

Remove manifold disconnect quick coup-

ling half (12), dust plug chain retaining

ring (13), and dust protective cap (14)

from multiple connector (6), Remove dust

plug chain retaining ring and dust protec-

tive cap from manifold disconnect quick

coupling half.

Remove four socket head capscrews (15),

check valve (16), and two preformed

packings (17) from multiple connector (6).

Remove two preformed packings from

check valve.

TM 9-2350-238-34-2

REMOVAL/DISASSEMBLY

2-193