TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 103 of 796

ASSEMBLY AND PREPARATION FOR USE

INITIAL SETUP:

References

Components of End Items (COEI) and Basic

Issue Items (BII) lists (WP 0132)

DA Form 5988-E (WP 0131)

Preventive Maintenance Checks and Services

(PMCS) – after, including lubrication

instructions (WP 0098)

Preventive Maintenance Checks and Services

(PMCS) – before, including lubrication

instructions (WP 0096)

References (cont.)

Preventive Maintenance Checks and Services

(PMCS) – during, including lubrication

instructions (WP 0097)

Stowage and decal/data plate guide (WP 0065)

TM 9-2350-256-10 HR (WP 0131)

PREPARATION FOR USE

When a new vehicle is received by the unit, it must be thoroughly inspected. If there are any discrepancies with

the vehicle, record it on DA Form 5988-E (WP 0131). Check the vehicle for completeness of assembly. Make sure

that all equipment and controls are present and in good shape. Check the Components of End Item (COEI) and

Basic Issue Items (BII) against the COEI and BII lists (WP 0132) and TM 9-2350-256-10 HR (WP 0131) to be

sure they are all present. Stow all COEI and BII in their designated stowage locations (WP 0065).

END OF TASK

INITIAL ADJUSTMENTS, CHECKS, AND SELF

−

TEST

Perform all BEFORE (WP 0096), DURING (WP 0097), and AFTER (WP 0098) operation checks and services in

the Preventive Maintenance Checks and Services (PMCS).

END OF TASK

END OF WORK PACKAGE

TM 9-2350-256-10

0008

0008-1/blank