TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 108 of 796
ENGINE PRESTART OPERATION - Continued
CAUTION
To prevent throttle linkage solenoid failure, always ensure POWER control lever is in the
OFF position during normal vehicle driving operations. Failure to comply may result in
damage to equipment.
NOTE
All levers except SYSTEM SELECTOR and POWER control lever are spring-loaded and
return to NEUTRAL, HOLD, or LIVE position automatically.
6.
Set the following controls to their prestart positions:
•
Hydraulic control valve panel (Figure 3, Item 1) — MAIN WINCH and HOIST WINCH shift levers in
NEUTRAL
•
SYSTEM SELECTOR control lever OFF (Figure 3, Item 2)
•
POWER control lever OFF (Figure 3, Item 3)
Figure 3.
Lever Prestart Positions.
TM 9-2350-256-10
0009
0009-4
Back to Top
