TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 304 of 796
RELOADING
1.
Ensure all discharger barrels (Figure 7, Item 5) are clear.
2.
Refer to Unloading and Ammunition in this WP if grenades (Figure 7, Item 3) are still in discharger barrels
(Figure 7, Item 5).
3.
Reload discharger barrels (Figure 7, Item 5) with grenades (Figure 7, Item 3) from the two grenade storage
bins (Figure 7, Item 4).
END OF TASK
UNLOADING
WARNING
•
Ensure that the arming switch is OFF (lamp not lit) before removing grenades from
a discharger. Accidental firing may occur. Failure to comply may result in
personnel death or injury.
•
Do not place body in front of dischargers when dischargers are unloaded/loaded.
Failure to comply may result in personnel death or injury.
1.
Ensure that arming switch (Figure 7, Item 1) is in OFF position.
2.
Ensure MASTER switch (WP 0004) is in OFF position.
3.
Remove grenades (Figure 7, Item 3) from discharger barrels (Figure 7, Item 5) by pulling grenade out with
hands.
4.
Return grenades (Figure 7, Item 3) to metal ammunition storage boxes (Figure 7, Item 2) and put boxes in
ammunition storage bins (Figure 7, Item 4) on side of hull.
5.
Install canvas covers (Figure 7, Item 6) over discharger barrels (Figure 7, Item 5) to keep out debris.
TM 9-2350-256-10
0054
0054-8
Back to Top
