TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 364 of 796

TOW DISABLED VEHICLE - Continued

3.

Establish communication between the M88A1 and the holdback (braking) vehicle.

CAUTION

Ensure disabled vehicle's external components are stowed in proper positions to prevent

interference with towing operations. Failure to comply may result in damage to equipment.

4.

Shift transmission shift selector (WP 0012) to 1st gear to get rolling; then shift to 2nd gear only if using tow

bar and if ground conditions permit.

CAUTION

Monitor transmission temperature gauge. If gauge reaches 260°F (127°C), stop towing,

place transmission in P position, and raise engine speed between 2,200 and 2,400 rpms.

Maintain engine speed until transmission oil temperature drops below 240°F (116°C).

Repeat as necessary during towing operations. Failure to comply may result in damage

to equipment.

5.

Use a series of short turns to steer the vehicles. Make wide gradual turns made up of many little turns. This

will help keep the vehicles in line.

END OF TASK

END OF WORK PACKAGE

TM 9-2350-256-10

0066

0066-4