TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 437 of 796
MAIN WINCH OPERATION - Continued
Figure 2.
Main Winch Shift Lever.
CAUTION
Do not inhaul cable under load in HIGH gear. Reel in cable under a load heavy enough to
keep cable tight and off ground. Failure to comply may result in damage to equipment.
5.
Move MAIN WINCH operating lever (Figure 3, Item 1) to INHAUL position to recover disabled vehicle. Keep
MAIN WINCH operating lever at INHAUL position until disabled vehicle is as close as possible to main
winch. This will keep tension on main winch cable during inhaul.
6.
Release MAIN WINCH operating lever (Figure 3, Item 1).
7.
Move main hydraulic lever to OFF position (Figure 3, Item 2).
Figure 3.
Main Winch Operating Lever.
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0080
0080-3/blank
Back to Top
