TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 503 of 796

WINCHES AND BOOM TROUBLESHOOTING

INITIAL SETUP:

Tools and Special Tools

General mechanic's tool kit

(WP 0135, Table 1, Item 2)

Materials/Parts

Wiping rags Qty: AR (WP 0134, Table 1, Item 57)

Personnel Required

Crewman (3)

References

Hoist winch operation (WP 0079)

References (cont.)

Main winch operation (WP 0080)

Preventive Maintenance Checks and Services

(PMCS) – weekly, including lubrication

instructions (WP 0099)

WARNING

Fuel/solvent/oil is slippery and may cause falls. Wipe up spillage immediately with rags.

Dispose of materials in accordance with local hazardous waste disposal procedures.

Failure to comply may result in personnel death, injury, or damage to equipment.

TROUBLESHOOTING PROCEDURE

MAIN OR HOIST WINCH SHIFT LEVER WILL NOT SHIFT

SYMPTOM

Main or hoist winch shift lever will not shift.

MALFUNCTION

Linkage is bent, missing, or loose.

CORRECTIVE ACTION

1.

Check for bent, missing, or loose linkage.

2.

If loose linkage is found, tighten and recheck hoist winch (WP 0079) and main winch (WP 0080)

shifting operation.

3.

If linkage is bent or missing, notify maintenance.

TM 9-2350-256-10

0094

0094-1