TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 515 of 796
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) – BEFORE,
INCLUDING LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Offset funnel (WP 0132, Table 2, Item 25)
Materials/Parts
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (2)
References
Acetylene cylinder replacement, if equipped
(WP 0125)
Adjusting commander’s seat (WP 0036)
Adjusting operator’s and mechanic’s seat
(WP 0035)
Commander's cupola operation (WP 0026)
Driving the vehicle (WP 0014)
Engine deck door operation (WP 0028)
References (cont.)
Engine deck grilles operation (WP 0030)
Hatch operation (WP 0025)
Hull access covers and gaskets removal and
installation (WP 0104)
Lubrication instructions (WP 0101)
Normal engine operation (WP 0011)
Prepare main hydraulic system for operation
(WP 0073)
Rear engine deck exhaust grille and exhaust
deflector operation (WP 0029)
Shut down main engine (WP 0017)
Starting main engine (WP 0010)
Starting main engine in cold weather -25°F to
32°F (-32°C to 0°C) (WP 0059)
TM 11-5830-263-10 (WP 0131)
TM 11-5830-340-12 (WP 0131)
Transmission shift selection (WP 0012)
Equipment Condition
Vehicle parked on level surface
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) – Before.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
CAUTION
Refer to Lubrication Instructions Tables 2
through 5 (WP 0101) for proper use of
lubricants and temperature ranges. Using
the wrong lubricant may cause erratic
operation of equipment. Failure to comply
may result in damage to equipment.
1
BEFORE
Vehicle Exterior
Walk around vehicle. Check for fluid leakage, missing
items, tampering, or damage to equipment.
Any fuel leaks.
Any Class III oil or
hydraulic fluid leaks.
TM 9-2350-256-10
0096
0096-1
Back to Top
