TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 519 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – Before - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

8

BEFORE

Engine Oil Level

Check

CAUTION

•

Perform engine oil check with

vehicle on a level surface and

engine stopped for at least two

hours. Failure to comply may result

in damage to equipment.

•

Do not use ENG IDLING RANGE

side of oil gauge rod to measure

engine oil level. Use of ENG

IDLING RANGE side of oil gauge

rod could result in damage to

equipment.

1. Open engine deck door (WP 0028).

2. Open engine oil level check access door.

Figure 7.

Engine Deck Door.

3. Remove oil gauge rod and wipe clean.

4. Insert oil gauge rod in gauge tube.

5. Remove oil gauge rod and ensure oil level is above

ENGINE STOPPED, SAFE TO START mark on engine

oil gauge rod.

TM 9-2350-256-10

0096

0096-5