TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 251 of 948

TM 9-2350-256-20-1

0052 00

CORRECTIVE ACTION –Continued

2.

Reconnect gage panel to bulkhead wiring harness to gage panel. Disconnect wire 27D from transmis-

sion oil temperature gage. Place red lead of multimeter in wire 27D and black lead to ground. Turn

MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage is present, go to step

3. If voltage is not present, repair/replace wire 27D of gage panel wiring harness (see WP 0193 00).

3.

Reconnect wire 27D to transmission oil temperature gage. Disconnect wire 324 from transmission oil

temperaturegage. Turn MASTERswitch on and check transmission oil temperaturegageforoperation.

Transmission oil temperature gage should read "0." Ground case of transmission oil temperature gage

and check gage for operation. Gage should read full scale. Turn MASTER switch OFF. If transmission

oil temperature gage reads correctly, go to step 4. If transmission oil temperature gage fails to read

correctly, replace transmission oil temperature gage (see WP 0157 00).

0052 00-3