TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 263 of 948

TM 9-2350-256-20-1

0054 00

CORRECTIVE ACTION –Continued

2.

Place red lead of multimeter on pin A of voltage regultor and black lead to ground. Turn MASTER

switch on, start engine, open generator cutout switch and check for voltage. Turn engine and MASTER

switch OFF, and close generator cutout switch. If voltage is present, go to step 7. If voltage is not

present, replace main engine regulator (see WP 0154 00).

3.

Disconnect electrical accessories panel wiring harness from electrical accessories panel. Place red lead

of multimeter in socket C of wire 1 and black lead to ground. Turn MASTER switch on and check for

voltage. Turn MASTER switch OFF. If voltage is present, go to step 4. If voltage is not present, go to

step 5.

0054 00-3