TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

  TM-9-2350-256-20-1 - Page 811 of 948

TM 9-2350-256-20-1
0122 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
PURGE PUMP/HANDLE/LEVER
MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Bushing (item 62, WP 0491 00)
Lockwasher (item 621, WP 0491 00)
Lockwasher (item 637, WP 0491 00)
Lockwashers (4) (item 640, WP 0491 00)
Lockwasher (item 645, WP 0491 00)
Nut (item 688, WP 0491 00)
Materials/Parts (cont.)
Pins, cotter (3) (item 515, WP 0491 00)
Pins, straight (3) (item 708, WP 0491 00)
Screw (item 578, WP 0491 00)
Screw (item 776, WP 0491 00)
Screws (4) (item 800, WP 0491 00)
References
TM 9-2350-256-10
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
NOTE
Push in manual fuel shutoff and turn fuel pump switch to OFF position to shut off fuel to purge pump.
NOTE
Push in fuel shutoff handle, start engine (refer to TM 9-2350-256-10), and check for leaks.
NOTE
Handle can be repaired without removing purge pump.
0122 00-1


Back to Top